Grout Cleaning Techniques That Will Save You Time And Money

A beautiful tile floor makes your home more presentable, but grout cleaning is a different story. Mold, mildew stains and grimes are indeed difficult to deal with and you need to extensively clean your grout so your tile floor will be restored to its best condition. There is no need to use complicated cleaning method and you should also stay away from harsh chemicals especially if the stains are not really hard to remove. You just need to use some simple techniques that will save you both time and money.

Cleaning Your Grout The Conventional Way

Conventional grout cleaning involves using bleach solution to remove tough stains. In using bleach for cleaning your grout, you need to allow it to settle so stubborn stains are effectively eradicated. However, the disadvantage of using bleach for cleaning is the presence of harmful chemical and this can be released into the air. If you have children at home, you are most likely to increase the risk of harming them with these chemicals. Look for much safer options. Take time to read the label and ask Grout Cleaner Melbourne for some recommendations.

Cleaning Methods That Are Environmentally Friendly

You can save grout from potential damage if you use green cleaning methods. Mixing water with 50% hydrogen peroxide is a good option. You just need to put the solution on a spray bottle so you use it anytime you wish to remove unsightly grout stains. When spraying the grout with this liquid solution, make sure you let it sit for approximately ten minutes. For stubborn stains, you may need to repeat the process. Apply baking soda and hydrogen peroxide to grout lines and allow it to sit until it is completely dry. You can remove baking soda residue using vacuum cleaner.

To Seal Or Not To Seal

It is imperative that you keep your grout lines stain free and clean but grout cleaning is indeed a difficult process especially if you do not clean them regularly. This is why sealing grout lines is an effective technique so you can protect the surface against mildew stains and dirt. In applying a sealer, make sure you let grout lines dry. Allow lines to dry for at least 24 hours so moisture will not linger in the grout’s pores. If you want to veer away with sealers that have toxic properties, choose water-based formula. It should also be applied using a foam brush. It takes an hour or two for the sealer to dry so make sure you follow the right drying time to achieve the effect you want.